Презентация на тему Install USB Driver and Set Mapping

“LGE_GSM_Device_Driver_OMAPV1030_1.0” for Installation Infineon usb driver.

Device Detection
USB Port Mapping
Configuration

to Download

USB Driver Installation to Download

Whole Process

pop-up Found new hardware wizard and detect the new usb

device.
Check “Install the software automatically (Recommended)” button, install driver for the device. (or set specific location.)
In case of Infineon, “Flash Loader utility” will be installed. In case of Neptune, “LGE GSM Device OMAPV1030” will be installed.
If you have several usb ports for usb download, you have to repeat installation from No. 1 to No. 3 for each the usb port.

Eg. In case of Infineon, “Flash Loader utility” will be installed as shown below.

Device Detection

USB Port Mapping

Configuration to Download

USB Driver Installation to Download

Whole Process

check solution, click mapping start.
Connect the usb or nexus

cable with the device in order of port number.
If you have the disable port, click “SKIP” button.
After mapping is completed, click “Save & Exit” button.

Connection in 1st port

Connection in 2nd port

Skip 3rd port

Device Detection

USB Port Mapping

Configuration to Download

USB Driver Installation to Download

Whole Process